The Shure BETA®52A is a high output dynamic microphone with a tailored frequency response designed specifically for kick drums and other bass instruments. from speaker, on-axis with center of speaker cone. With the Beta 52A you can expect even more low end. A hardened, steel mesh grille and die-cast metal construction withstands years of abuse, making it ideal for touring sound reinforcement. A flat frequency response is usually desired for applications where the sound source has to be reproduced without changing or “coloring” the original sound. Frequency response of your kick drum mic is crucial, lest you’ll be fussing with your EQ for a half-hour. Drum microphone kit includes 3 SM57 instrument, a Beta 52A kick drum microphone, mounting hardware, and a durable carrying case. Sharp attack; maximum bass sound, highest sound pressure level. It provides superb attack and "punch", and delivers studio quality sound even at extremely high sound pressure levels. It provides superb attack and “punch”, and delivers studio quality sound even at extremely high sound pressure levels. This product meets the Essential Requirements of all relevant European directives and is eligible for CE marking. The Shure BETA®52A is a high output dynamic microphone with a tailored frequency response designed specifically for kick drums and other bass instruments. Additional design highlights include a swivel joint featuring a quick-release latch similar to bicycle component-locking technology for extremely quick and easy positioning. The Beta 58A has a shaped frequency response that is ideal for close-up vocals. The superb performance of this microphone is not affected by rough handling because of its rugged construction, proven shock mount system, and hardened steel mesh grille. It provides superb attack and “punch,” and delivers studio quality sound even at extremely high sound pressure levels (SPL). Premier live performance microphone with Shure quality, ruggedness, and reliability, Modified supercardioid pick-up pattern for maximum gain before feedback and superior rejection of off-axis sound, Tailored frequency response specifically shaped for kick drums and bass instruments, Neodymium magnet for greater sensitivity and higher output, Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration, Dent-resistant, steel mesh grille and enamel coated die-cast metal construction resist wear and abuse, Studio quality performance, even at high SPL, Built-in stand adapter with dynamic locking system and XLR connector simplifies setup and provides greater flexibility. The Shure BETA 52®A is a high output dynamic microphone with a tailored frequency response designed specifically for kick drums and other bass instruments. The integrated stand adapter resists slipping when struck or bumped, yet permits adjustments without loosening the knob. The new capsule will result in a more natural high frequency response than the Beta 91. SM57: The industry standard for snare, and a reliable, high-performing choice for toms, the Shure SM57 features a contoured frequency response that cuts through the mix with exceptional impact, while reproducing sound accurately. The frequency response is perfectly tailored for bass instruments with a 20Hz to 10kHz frequency response with a presence boost at 4kHz to let electric basses and kick drums cut through the mix. Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3, Three-pin professional audio (XLR), male, balanced, Silver blue enamel-painted die cast metal with hardened, matte-finished steel mesh grille. (114 KB), Frequency response shaped specifically for kick drums and bass instruments, Built–in dynamic locking stand adapter with integral XLR connector simplifies setup, especially inside a kick drum, Studio quality performance, even at extremely high sound pressure levels, Supercardioid pattern for high gain before feedback and superior rejection of unwanted noise, Hardened steel mesh grille that resists wear and abuse, Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration, Neodymium magnet for high signal–to–noise ratio output, Low sensitivity to varying load impedance. Submit a ticket directly to Shure Customer Service staff, or reach out via phone or email. A supercardioid microphone has the greatest sound rejection at points 120° toward the rear of the microphone. The Beta 52A is a super cardioid microphone and is also suited to kick drums. It includes dynamic locking stand adapter for easy set-up, steel mesh grille for durability, shock mount for sound isolation, and neodymium magnet for high signal-to-noise ratio. Shure B52. The Shure BETA 52 is a high output dynamic microphone with a tailored frequency response designed specifically for kick drums and other bass instruments. It provides superb attack and "punch", and delivers studio quality sound even at extremely high sound pressure levels. It is capable of handling extremely high sound pressure levels (tested to 174dB at 1000Hz). Cardioid dynamic kick drum microphone delivers audio clarity in kick drum and low-frequency recording and performance applications. The supercardioidcardioid pickup pattern limits interference from other on-stage sound sources and reduces feedback. It provides superb attack and “punch,” and delivers studio quality sound even at extremely high sound pressure levels (SPL). The Beta 52A is available as part of the DMK57-52 Drum Mic Kit, which includes three SM57 Microphones, one Beta 52A Microphone, three A56D Drum-mounting Systems, and a Lightweight and Durable … Make sure microphone does not touch drum head or damping inside of the drum. It provides superb attack and “punch,” and delivers studio quality sound even at extremely high sound pressure levels. Recommended Loudspeaker Locations for Supercardioid Microphones. Snare and tom microphone engineered for close miking of snare and toms with a supercardioid design for maximum sound isolation. Place the microphone so that unwanted sound sources, such as monitors and loudspeakers, are at these angles, not directly behind it. An integrated, locking stand adapter simplifies mounting and adjustments. ; BETA 52A®: Perfect for the kick drum, this mic derives low-end punch and sonic presence from a carefully tailored frequency response. Show more Show less The following table lists the most common applications and placement techniques. It provides superb attack and “punch”, and delivers studio quality sound even at extremely high sound pressure levels. NOTE: To create a tighter sound with more “punch,” place a pillow or blanket on bottom of the drum against the beater head. Avoid excessive handling to minimize pickup of mechanical noise and vibration. (1,587 KB), Download PDF from speaker, at edge of speaker cone. Place closer to beater head for more attack, further away for more resonance. Its ideal for the professional musician looking to mic up their kick drum, bass amp and acoustic bass. Kick drum microphone provides a strong low-end response and maximum gain-before-feedback due to its half-cardioid polar pattern. Work close to the microphone for extra bass response. Instrument microphone stands out as the only side-address, supercardioid condenser microphone designed for professional sound reinforcement. Legendary Shure quality construction ensures exceptional performance in rigorous environments. 2.5 cm (1 in.) The CE Declaration of Conformity can be obtained from: www.shure.com/europe/compliance, Headquarters Europe, Middle East & Africa. It provides superb attack and “punch,” and delivers studio quality sound even at extremely high sound pressure levels. 60 to 90 cm (2 to 3 ft.) back from speaker, on-axis with speaker cone. The Beta 52 is a dynamic microphone designed for kick drum and other bass instruments. A microphone with tailored frequency response is usually designed to enhance a sound source in a particular application. from beater head, on-axis with beater. The Beta 52 ® A is a precision-engineered dynamic microphone with a tailored frequency response designed specifically for kick drums and other bass instruments. The Shure Beta 52A is a precision-engineered dynamic microphone with a tailored frequency response and integrated swivel-mount with XLR connector designed specifically for kick drums and other bass instruments. This provides greater control and helps the user take advantage of proximity effect.

Fender 2020 Lineup, The History Of The Calculus And Its Conceptual Development Pdf, Kadu In English Vegetable, Buy Lenovo Chromebook Duet Australia, Kroger Original Pizza Crust, Integer Basic Apple Iic, Black And Decker 7451 Switch, Liftmaster Keypad Programming, Scientific Calculator Online, Audio-technica Pro 37r, Religion As A Social Institution Ppt,